Wide Wheelchair & Bike Rims for Dust

Bikes, trikes, personal mobility and mutant vehicles - this is the place to discuss general transportation issues. For ride and RV shares, please go to the year-specific Share Resources board.

Wide Wheelchair & Bike Rims for Dust

Postby gyre » Sun Aug 24, 2008 11:59 am

These started out for sand and were adapted for snow.
I rode some last year and I could go right across a dust drift barely slowing down.
I was told it was a snow bike.
The tires were very smooth with a chevron pattern.

Wheelchair Wheels for Sand
Image
Image

I don't know if these are the same tires, but the Remolino sure seem to be.

Remolino 80 mm Aluminum Rims: Originally made for sand riding in the Southwest and Mexico, these rims are unfortunately no longer made but these are the rims that started it all. Circa 1999, a creation of Ray Molina of Remolino Adventure Works in New Mexico, these rims were first made for riding sand dunes and soon after found their way to Alaska for snow riding. If you can get your hands on a pair somewhere, these rims and the 3.7 tires fit on the FatBike for a truly monstrous wheel set up.

Remolino/Tornel 3.5 Sand Tires: Made specifically for the Remolino 80mm aluminum rims shown above. Low profile high width with chevron treads for traction in super loose surfaces and punchy marginal riding conditions. Weight: 1320 g.

Surly Endomorph 3.7 Tires These are the biggest tires available for mountain bikes and work extremely well in a variety of conditions ranging from snow to sand to trails. The chevron pattern with side knobs roll surprisingly fast for such a huge tire. weight 1250 g.

Surly Large Marge Rims: 26 X 65mm double wall rims accommodate the big sneakers. Available in offset drilled version to fit the 18 mm offset rear stays of the FatBike or center drilled for the front wheel. Weight 1200g
Image

http://www.allweathersports.com/winter/snowcats.html
http://www.wildfirecycles.com/fatbikes.html

viewtopic.php?p=404311#404311
User avatar
gyre
 
Posts: 15465
Joined: Sun Aug 07, 2005 6:01 pm
Location: ΦάÏ

Postby gyre » Sun Sep 21, 2008 4:39 am

I wanted to remind people of these after the dust this year.
It really does work.
User avatar
gyre
 
Posts: 15465
Joined: Sun Aug 07, 2005 6:01 pm
Location: ΦάÏ

Postby gyre » Sun Sep 21, 2008 10:23 am

User avatar
gyre
 
Posts: 15465
Joined: Sun Aug 07, 2005 6:01 pm
Location: ΦάÏ

Postby Toolmaker » Sun Sep 21, 2008 5:53 pm

The fish had inquired about playa worthy wheelchair wheels. I posted some links in that thread as to where I got the tires for my wheelchair. The ones I used for the quickie went right on without modifications to my chair. I can't find the vendor since my bookmarks are overloaded again and need to be sorted/archived. Maybe the fish will drop by the thread and post the links I gave her.
This account has been closed as demanded by Wedeliver.
Toolmaker
 
Posts: 2512
Joined: Wed Sep 27, 2006 12:44 pm

Postby theCryptofishist » Sun Sep 21, 2008 9:02 pm

I can only do that by going through the threads again. Maybe if I search on wheelchair.
The Lady with a Lamprey

"The powerful are exploiting people, art and ideas, and this leads to us plebes debating how to best ration ice.
Man, no wonder they always win....." Lonesomebri


Get a Taint, you pathetic cur!
User avatar
theCryptofishist
 
Posts: 39928
Joined: Mon Feb 23, 2004 10:28 am
Location: In Exile
Burning Since: 2017

Postby Toolmaker » Mon Sep 22, 2008 2:21 pm

This is where I got the stuff for my wheelchair. I didn't have to use it much this year but I certainly wish I would have had it in 07 since I did wayy too much physical labor type stuff wayy too soon after gettin the foot run over.

http://www.edmond-wheelchair.com/wheelc ... arings.htm
This account has been closed as demanded by Wedeliver.
Toolmaker
 
Posts: 2512
Joined: Wed Sep 27, 2006 12:44 pm

Postby Artemis » Wed Feb 11, 2009 8:14 am

Here's some back and forth between Fishy and Toolmaker about wheels. I couldn't remember how to bring you right to that post, but it's about 1/2 way down page:
viewtopic.php?t=25679&start=120

also, some earlier posts on same subject:
viewtopic.php?t=21925&highlight=wheelchair

viewtopic.php?t=23296&highlight=wheelchair
User avatar
Artemis
 
Posts: 923
Joined: Tue Aug 19, 2008 6:26 am
Location: NYC

Postby Toolmaker » Thu Feb 12, 2009 1:32 am

I wonder how much trouble it would be to use a chainsaw or something for a cheap powered chair hack. Seen something along those lines used on trikes and got to thinkin that it might be nice to have a motor for dunes and long hauls. Those electrics just seem too heavy and a drag to keep charged compared to a hack using a gas motor that just needs some juice added here n there.
This account has been closed as demanded by Wedeliver.
Toolmaker
 
Posts: 2512
Joined: Wed Sep 27, 2006 12:44 pm

Postby Simon of the Playa » Thu Feb 12, 2009 9:27 am

Image
fuck you, it's magic


more panky, less hanky

A gift for the Playa

THIS YEARS POSTERS

2015 posters
User avatar
Simon of the Playa
 
Posts: 15635
Joined: Thu Sep 06, 2007 6:25 pm
Location: Rochester, Nevada.
Burning Since: 1996
Camp Name: La Guilde des Hashischins

Postby Simon of the Playa » Thu Feb 12, 2009 9:29 am

oops....double post...

and i'll dig up some plans i had for a motorized chair with gas engine as described by toolmaker...

i believe it uses a weed whacker engine though.
fuck you, it's magic


more panky, less hanky

A gift for the Playa

THIS YEARS POSTERS

2015 posters
User avatar
Simon of the Playa
 
Posts: 15635
Joined: Thu Sep 06, 2007 6:25 pm
Location: Rochester, Nevada.
Burning Since: 1996
Camp Name: La Guilde des Hashischins

Postby ygmir » Thu Feb 12, 2009 9:56 am

don't the manual ones use a "pudwacker" engine?
YGMIR

Unabashed Nordic
Pagan
User avatar
ygmir
 
Posts: 27368
Joined: Thu Sep 20, 2007 8:36 pm
Location: nevada county
Burning Since: 2017
Camp Name: qqqq

Postby Simon of the Playa » Thu Feb 12, 2009 10:01 am

you mean the PoweredByKisha Model?
fuck you, it's magic


more panky, less hanky

A gift for the Playa

THIS YEARS POSTERS

2015 posters
User avatar
Simon of the Playa
 
Posts: 15635
Joined: Thu Sep 06, 2007 6:25 pm
Location: Rochester, Nevada.
Burning Since: 1996
Camp Name: La Guilde des Hashischins

Postby Toolmaker » Thu Feb 12, 2009 10:06 am

Simon of the Playa wrote:oops....double post...

and i'll dig up some plans i had for a motorized chair with gas engine as described by toolmaker...

i believe it uses a weed whacker engine though.


I found a website/forum that deals with powered bikes with all size engines.

http://www.motoredbikes.com

I would be interested in the weedwacker plans if you come across them.
This account has been closed as demanded by Wedeliver.
Toolmaker
 
Posts: 2512
Joined: Wed Sep 27, 2006 12:44 pm

Postby ygmir » Thu Feb 12, 2009 10:10 am

Simon of the Playa wrote:you mean the PoweredByKisha Model?


how'd you read the tag, it's so small.......
YGMIR

Unabashed Nordic
Pagan
User avatar
ygmir
 
Posts: 27368
Joined: Thu Sep 20, 2007 8:36 pm
Location: nevada county
Burning Since: 2017
Camp Name: qqqq

Postby Toolmaker » Thu Feb 12, 2009 10:17 am

This account has been closed as demanded by Wedeliver.
Toolmaker
 
Posts: 2512
Joined: Wed Sep 27, 2006 12:44 pm

Postby Simon of the Playa » Thu Feb 12, 2009 10:38 am

i made a motorized ten-speed with a 49cc single stroke that was fun as shit (and slightly dangerous as it reached 40mph top end) and very easy to build by attaching second chain to front gear and utilizing back gears for torque, etc...

noisy little bugger though.

damn....it's snowing outside, and all i wanna do is ride.... :cry:
fuck you, it's magic


more panky, less hanky

A gift for the Playa

THIS YEARS POSTERS

2015 posters
User avatar
Simon of the Playa
 
Posts: 15635
Joined: Thu Sep 06, 2007 6:25 pm
Location: Rochester, Nevada.
Burning Since: 1996
Camp Name: La Guilde des Hashischins

Postby Simon of the Playa » Thu Feb 12, 2009 10:44 am

i think collectively, we could easily build and transport either a whole unit, or an adapter unit for the fish.

i agree, gas or propane is the way to go, electricity is still a little tweaky, but soon with the ever increasing power and duration lithium/ion batteries provide, i think this will change.


When's your Birthday Fishy?
fuck you, it's magic


more panky, less hanky

A gift for the Playa

THIS YEARS POSTERS

2015 posters
User avatar
Simon of the Playa
 
Posts: 15635
Joined: Thu Sep 06, 2007 6:25 pm
Location: Rochester, Nevada.
Burning Since: 1996
Camp Name: La Guilde des Hashischins

Postby theCryptofishist » Thu Feb 12, 2009 8:13 pm

July.
The Lady with a Lamprey

"The powerful are exploiting people, art and ideas, and this leads to us plebes debating how to best ration ice.
Man, no wonder they always win....." Lonesomebri


Get a Taint, you pathetic cur!
User avatar
theCryptofishist
 
Posts: 39928
Joined: Mon Feb 23, 2004 10:28 am
Location: In Exile
Burning Since: 2017

Wheelchair invention

Postby esper » Thu Feb 12, 2009 8:38 pm

[quote="jessicasteven"]I have invented a product for a wheelchair and I went to see a machinist and they basically told me to get lost.I have my prototype and I know what I want but nobody wants to give me the time of day.So when I go to a machinist or fabrcator what should I bring besides the prototype.Someone please help.[/quote]

Jessica, I am an optical metrologist. A major part of my job is rapid prototyping so please shoot me an email and I can at least walk you through the steps you need to take.

a dot frost at steinbichler-vision dot com

Sorry for the non email email address, but I must beware the spam bots.
Never say die... Even if it kills you.
esper
 
Posts: 9
Joined: Fri Jan 09, 2009 5:08 pm
Location: Farmington, MI

Re: Wheelchair invention

Postby theCryptofishist » Thu Feb 12, 2009 8:55 pm

esper wrote:Sorry for the non email email address, but I must beware the spam bots.

You Monster! Those happy little spam bots only want to be your friends.
The Lady with a Lamprey

"The powerful are exploiting people, art and ideas, and this leads to us plebes debating how to best ration ice.
Man, no wonder they always win....." Lonesomebri


Get a Taint, you pathetic cur!
User avatar
theCryptofishist
 
Posts: 39928
Joined: Mon Feb 23, 2004 10:28 am
Location: In Exile
Burning Since: 2017

Postby Toolmaker » Fri Feb 13, 2009 8:51 am

jessicasteven wrote:I have invented a product for a wheelchair and I went to see a machinist and they basically told me to get lost.I have my prototype and I know what I want but nobody wants to give me the time of day.So when I go to a machinist or fabrcator what should I bring besides the prototype.Someone please help.


I prefer working with prints but would be willing to put a prototype on the CMM for dimensioning. I don't know why any shop would tell you to get lost unless it was a production shop. You want to find a "job shop", something on the small and grimey side. Alot of the small shops are hurtin for work and will do anything. Also keep in mind some shops want 30-80 dollars an hour regardless of what they are doing. I'm in a gift giving mood today so to help you out I'll put up the CNC programming for free. Give me dimensions, material type, and what kind of CNC machine and I'll give ya the code.
This account has been closed as demanded by Wedeliver.
Toolmaker
 
Posts: 2512
Joined: Wed Sep 27, 2006 12:44 pm

Postby Elorrum » Sun Mar 01, 2009 12:52 pm

surleybikes.com has wide wheels, and wide wheel bike frames. I've been looking at wheels for a trike design, but would need different kinds of hubs and a custom build... but still trolling ebay and other sites for that solution. the lowrider bike sites usually have a trike kit available and I've been looking into that for my chopper that I couldn't ride last year.
User avatar
Elorrum
 
Posts: 5049
Joined: Sat Mar 15, 2008 9:09 pm
Location: San Jose, CA

Re: Wheelchair invention

Postby mdmf007 » Sun Mar 01, 2009 1:45 pm

jessicasteven wrote:I have invented a product for a wheelchair and I went to see a machinist and they basically told me to get lost.I have my prototype and I know what I want but nobody wants to give me the time of day.So when I go to a machinist or fabrcator what should I bring besides the prototype.Someone please help.


Money - Almost any machine shop will make what you wnat from whatever material you want. Some are more willing to work with you than others like any bisness.

Id call around or drop some sketches so we can point you in the right way.
User avatar
mdmf007
Moderator
 
Posts: 5156
Joined: Wed Mar 08, 2006 8:32 pm
Location: my computer
Burning Since: 1996
Camp Name: ESD

Postby gyre » Sun Mar 01, 2009 3:53 pm

The wide forks are available from Surly and will fit most bikes.
Other than frame modification, how about building a longtail kit to fit the wider tires?
Xtracycle has made the technology open source.
Image
http://www.xtracycle.com/longtailtech/i ... /Main_Page
http://www.xtracycle.com/
http://www.xtracycle.com/home/support/sitemap/

Xtracycle has a specific philosophy about the future of bike's evolution.
It would be easy to dismiss if they hadn't put their longtail innovation on the table.
It's a big site and I suggest looking around a bit.
Find out if the longtail might be useful to you.

Surly Longtail Big Dummy
http://store.xtracycle.com/_e/Xtracycle ... _Surly.htm

Image
Image
http://www.surlybikes.com/
User avatar
gyre
 
Posts: 15465
Joined: Sun Aug 07, 2005 6:01 pm
Location: ΦάÏ

Postby gyre » Mon May 18, 2009 2:02 pm

If there is loose dust this year, wider and smoother is better.
You want to float over the dust.
User avatar
gyre
 
Posts: 15465
Joined: Sun Aug 07, 2005 6:01 pm
Location: ΦάÏ

Postby Toolmaker » Mon May 18, 2009 2:26 pm

I have been hearing from numerous local sources as to the lack of hydration in the region. Expect it to be dusty, just heard this past week from 2 sources that they seem to have skipped a season and went straight to hot as fuck summer season.

Its gonna be a pain in the ass for anyone trying to use wheels without motors.
This account has been closed as demanded by Wedeliver.
Toolmaker
 
Posts: 2512
Joined: Wed Sep 27, 2006 12:44 pm

Postby gyre » Sun Aug 16, 2009 10:00 am

I hope this year is smooth on the playa.
User avatar
gyre
 
Posts: 15465
Joined: Sun Aug 07, 2005 6:01 pm
Location: ΦάÏ

Postby vikb » Mon Aug 17, 2009 7:05 am

Image

I'll be riding a Surly Pugsley at the burn this year. The fat tires let you ride through soft stuff easily and also add some suspension even over the rough/hardpacked sections.

http://www.flickr.com/photos/vikapprove ... 461277546/

Very clever to use them for a wheel chair - I hadn't thought of that. *two thumbs up*

As has been noted above you can get the tires and rims from Surly Bikes, but they won't work in most bike frames due to a lack of clearance.

http://www.surlybikes.com/

cheers,

Vik
vikb
 
Posts: 29
Joined: Fri May 01, 2009 9:30 am

Postby gyre » Sun Dec 06, 2009 7:19 pm

Another playa tire.
Image
User avatar
gyre
 
Posts: 15465
Joined: Sun Aug 07, 2005 6:01 pm
Location: ΦάÏ

Postby theCryptofishist » Fri Oct 08, 2010 9:48 am

Wheelchair wheels have a few difference from bicycles. The hub is going to be different, whether the wheels pop off or not. I'm not sure what the adaption would be. I don't think that there's much experiementing, I think the wheels are much more expensive for the chair. Also, there's the handle that you grab to rotate the wheel so you can move forward.

It's actually a source of frustration to me. Wheelchairs shouldn't be as expensive as they are, because some componants could overlap wiht the bike market and achieve that sort of economy of scale.
The Lady with a Lamprey

"The powerful are exploiting people, art and ideas, and this leads to us plebes debating how to best ration ice.
Man, no wonder they always win....." Lonesomebri


Get a Taint, you pathetic cur!
User avatar
theCryptofishist
 
Posts: 39928
Joined: Mon Feb 23, 2004 10:28 am
Location: In Exile
Burning Since: 2017

Next

Return to Transportation

Who is online

Users browsing this forum: No registered users and 1 guest