s9ghost wrote:Was thinking about getting a 10x10 kodiak for this year. Seems to be a good tent. Do you have to do anything to support the tension poles, or keep them in place?
Nope. The only four structural anchors are the corners.
s9ghost wrote:As for the fabric loops on rebar, would it help to wrap the rebar in ductape as a buffer between the rebar and fabric loop?
Seriously, these things are solid as a rock. In my opinion, rebar would be total overkill. Get some 12 inch stakes and you'll be fine. Pound them flush to the ground, or more likely 1 inch under the crumbled crust of the ground. Loop some paracord under the heads so you can get them up easier. Remember, most instructions for 24 inch rebar involve pounding them in half way, that's only 12 inches of below ground anchor.
The sole exception to the rebar is if you intend to erect the small porch-style shade on the front. Pull the bottom plastic piece off the poles, and place over 24 inch rebar pounded in halfway. If you want it to stay perfect, you'll still have to use guy lines, but this will keep them steady. Wrap the top half of the rebar in some duct tape to keep it from clanging or moving too much.
Send lawyers, guns and money - The shit has hit the fan.