Martiansky wrote:Can anyone tell me what the difference is between the.....
I saw on ebay that theres a conversion kit to run the genny off propane.
Anybody tried that?
oneeyeddick wrote:And BTW, those eu2000i types are supposed to run on 87 octane gas for maximum effeciency, with only 10% or less methanol in the mix.
It's in the manual but no one ever reads those.
Uncle Shecky wrote:Uncle Shecky's Public Safety Campaign Bulletin #21
Publication Date: 06 December 2010
Products Affected: 1
Model: MK IV Goyim
DO NOT install a hotter spark plug in the MK IV Goyim yarmulke.
User reports indicate a dramatic increase in unplanned seizures, involuntary soiling, and esophagal matzo obstruction. Please use only an OEM approved sparkplug and no other. Please contact our service department to order approved parts or to speak with our factory trained staff about this PSC bulletin or to share nyatam recipes.
Uncle Shecky's INC will not be liable for the customers failure to adhere to the guidelines issued in PSC bulletins. By reading this bulletin you agree to these terma and any terms adopted in the future whether published or not. Your mother told you that you should know these things. Don't be a schlemiel. Listen to your mother, putz.
Uncle Shecky's Tinef Chazzerai MFG INC.
Abraham Lincoln wrote:The intake uses four AC muffin fans rated somewhere around 107cfm... not sure what their mmHG rating is. The intake filter is a large FRAM CA7640 which is used on large diesel engines, Dodge and Bobcat I think. The exhaust is a 9" baffled roof vent for a house. Everything was gorilla glued and screwed together- overbuilt for the playa. It will fit both the 1000i (as pictured) and the 2000 should I end up getting one in the future. Trials have shown that the fans generate significant positive air pressure in the box, even with large volume of exhaust coming out the back, but I think I'm going to put some kind of seal around the lid.
I'm going to vandal proof it by running some 3' candy cane rebar though 1" holes in the bottom and probably put some kind of heavy duty latch with combo lock on the lid.
I guess this counts as my overkill be-all-end-all playa dust killer for my Honda. Hopefully I don't have to redesign it too much for next year's art project.
Users browsing this forum: No registered users and 2 guests