30ft Monolith

30ft Monolith

Postby temptedfate » Sat Sep 12, 2009 7:59 pm

Hi I'm thinking of creating a 30ft monolith for my camp, but I don't want to use guy wires. Any suggestions on what I can do to secure it? I have no background in structual engineering and do not know anyone who is experienced in this sort of thing. My main concern is the wind. It is to have a 4 sided frame of angle iron and have plywood panels covering the exterior. Any suggestions from experienced or knowledgeable people would be extremely helpful
temptedfate
 
Posts: 2
Joined: Sat Sep 12, 2009 7:52 pm

Postby ygmir » Sat Sep 12, 2009 8:11 pm

one would guess you mean 30' tall?
if so, then, make it 45' wide both ways.....it should be fine..........
YGMIR

Unabashed Nordic
Pagan
User avatar
ygmir
 
Posts: 27227
Joined: Thu Sep 20, 2007 8:36 pm
Location: nevada county
Burning Since: 2017
Camp Name: qqqq

Postby temptedfate » Sat Sep 12, 2009 8:15 pm

45 feet wide both ways? what do you mean by that? I was hoping to make the base some where between 6 and 10 feet wide
temptedfate
 
Posts: 2
Joined: Sat Sep 12, 2009 7:52 pm

Postby Token » Sat Sep 12, 2009 9:33 pm

Your monolith should have dimensional ratios of 1 x 4 x 9.

I recommend 3 x 12 x 27 feet if you want something close to 30' high.

Drive truck axles into the playa at angle and weld to that.

BTW, you really need allot of craft, skill and a structural engineer before you try something of this magnitude. Big stuff like that can kill people when it falls.
User avatar
Token
 
Posts: 2436
Joined: Tue Sep 02, 2003 2:55 pm
Location: Gold Country, CA
Burning Since: 2001

Postby j_cavera » Sat Sep 12, 2009 9:43 pm

Build it as a hollow frame, 60 feet high. Sink it 30 feet into the playa. Cover with a very porous and lightweight black fabric.

Or better yet, hire a structural engineer.

Or even better, just don't. Refer to previous post about killing someone.

- Jim
j_cavera
 
Posts: 80
Joined: Wed Aug 06, 2008 9:47 am
Location: Phoenix


Return to 2009 Art & Performance

Who is online

Users browsing this forum: No registered users and 1 guest