ePlaya

by **unjonharley** » Thu Aug 05, 2010 9:56 pm

Think it would be nice to have a drill in the tool box.. But recharging a 18 or 24 volt waste a bunch of juice.. Make 120 AC then resist down to 18 naw..

I have an old 12 volt drill, a poor deep cell marine and a old extention cord.. Cut the ends off the cord and rig it from the deep cell to the drill.. Little heavy getting to the job site.. But it kicks ass when you needa drill..

by **unjonharley** » Sat Aug 07, 2010 8:50 pm

Picture this on the LCN contraption..

Included Page: http://community.webtv.net/Abc104/doc1

by **LeChatNoir** » Sat Aug 07, 2010 8:54 pm

I'll reserve the carriage seat for the two of you.

by **unjonharley** » Sat Aug 07, 2010 9:19 pm

oops

I'l try again

by **unjonharley** » Sat Aug 07, 2010 9:24 pm

Wrong again

by **LeChatNoir** » Sat Aug 07, 2010 9:26 pm

Still getting nuttin'.

What is it? Giant magnifying lens and a can of beans?

by **unjonharley** » Sat Aug 07, 2010 9:29 pm

LeChatNoir wrote:Still getting nuttin'.

What is it? Giant magnifying lens and a can of beans?

Can of bean is right.. To tiered.. Will try another time

by **unjonharley** » Sat Aug 07, 2010 9:38 pm

One more time.

http://community.webtv.net/Abc104/PoorMansSolorOven

There, Picture that..

by **LeChatNoir** » Sat Aug 07, 2010 9:42 pm

Wow... my guess was close!

by **unjonharley** » Wed Aug 18, 2010 9:58 pm

Added some side clearance light..

Do not need to be run over..

Picture this..

http://community.webtv.net/Abc104/doc2

by **unjonharley** » Sat Sep 25, 2010 3:49 pm

The unjon dear is put away for the winter.. He has his own rain coat.
I explained to him that he was a big boy and could be outside. So the shop is clear for other hopes and dreams..

The playa bike is washed, oiled and hung up..

by **LeChatNoir** » Tue Sep 28, 2010 6:25 pm

Came by to pick you up, but you had r-u-n-n-o-f-t.

Forgot where you said the rusty junk was hidden, and figured it best to not go digging through your stuff. Didn't want to get my fingers caught in a muskrat trap or anything.

Just means we've both got to get back to the desert.

by **unjonharley** » Tue Sep 28, 2010 7:26 pm

LeChatNoir wrote:Came by to pick you up, but you had r-u-n-n-o-f-t.

Forgot where you said the rusty junk was hidden, and figured it best to not go digging through your stuff. Didn't want to get my fingers caught in a muskrat trap or anything.

Just means we've both got to get back to the desert.

In the mean time we can bat some ideas around here.. It was sitting on top of the trailer!!

by **jella** » Wed Sep 29, 2010 10:44 am

unjonharley wrote:The unjon dear is put away for the winter.. He has his own rain coat.
I explained to him that he was a big boy and could be outside. So the shop is clear for other hopes and dreams..

The playa bike is washed, oiled and hung up..

Does he have his steering wheel cozy to keep him warm though the winter ?

by **unjonharley** » Wed Sep 29, 2010 12:37 pm

jella wrote:
unjonharley wrote:The unjon dear is put away for the winter.. He has his own rain coat.
I explained to him that he was a big boy and could be outside. So the shop is clear for other hopes and dreams..

The playa bike is washed, oiled and hung up..

Does he have his steering wheel cozy to keep him warm though the winter ?

Will post picture soon of the moop mobile and the wounderful basket liner you gave it..

by **unjonharley** » Fri Oct 08, 2010 11:15 am

Scored a 170$ compressor w/tank for $15. It's not what I want, but good trade stock.. She was cleaning out the X's stuff.. Only thing wrong with it is its al dusty..

I'm looking for a one piston (old rusty) compressor to run on the MV..

Been sorting and colecting junk for a quadricycle..

by **motskyroonmatick** » Fri Oct 08, 2010 4:41 pm

unjonharley wrote:I'm looking for a one piston (old rusty) compressor to run on the MV..

About what size Unjon? Old heavy truck or old beefy compressor? I'm imagining the ones with the cast iron 2 belt pulley. I might have some friends that have something like that in the junk pile. I'll ask around at fire drill.

by **unjonharley** » Fri Oct 08, 2010 5:01 pm

motskyroonmatick wrote:
unjonharley wrote:I'm looking for a one piston (old rusty) compressor to run on the MV..

About what size Unjon? Old heavy truck or old beefy compressor? I'm imagining the ones with the cast iron 2 belt pulley. I might have some friends that have something like that in the junk pile. I'll ask around at fire drill.

Can't be to large.. The old two pulley one is more what I had in mind.. Junk would be fine.. It will have to air up a small tank.. Need to operate a hoen or two and pump bike tires as gift.. It would make me happy if you find one for me..

by **motskyroonmatick** » Fri Oct 08, 2010 5:06 pm

unjonharley wrote:
motskyroonmatick wrote:
unjonharley wrote:I'm looking for a one piston (old rusty) compressor to run on the MV..

About what size Unjon? Old heavy truck or old beefy compressor? I'm imagining the ones with the cast iron 2 belt pulley. I might have some friends that have something like that in the junk pile. I'll ask around at fire drill.

Can't be to large.. The old two pulley one is more what I had in mind.. Junk would be fine.. It will have to air up a small tank.. Need to operate a hoen or two and pump bike tires as gift.. It would make me happy if you find one for me..

I'll see what I can do.

by **unjonharley** » Fri Oct 08, 2010 5:11 pm

motskyroonmatick wrote:
unjonharley wrote:
motskyroonmatick wrote:
unjonharley wrote:I'm looking for a one piston (old rusty) compressor to run on the MV..

About what size Unjon? Old heavy truck or old beefy compressor? I'm imagining the ones with the cast iron 2 belt pulley. I might have some friends that have something like that in the junk pile. I'll ask around at fire drill.

Can't be to large.. The old two pulley one is more what I had in mind.. Junk would be fine.. It will have to air up a small tank.. Need to operate a hoen or two and pump bike tires as gift.. It would make me happy if you find one for me..

I'll see what I can do.

Tanks, I'm cleaning out stuff.. I might fix up a colection of nut and bolts and spring and things for your repair camp 2011

by **motskyroonmatick** » Fri Oct 08, 2010 11:19 pm

unjonharley wrote:
motskyroonmatick wrote:
unjonharley wrote:
motskyroonmatick wrote:
unjonharley wrote:I'm looking for a one piston (old rusty) compressor to run on the MV..

About what size Unjon? Old heavy truck or old beefy compressor? I'm imagining the ones with the cast iron 2 belt pulley. I might have some friends that have something like that in the junk pile. I'll ask around at fire drill.

Can't be to large.. The old two pulley one is more what I had in mind.. Junk would be fine.. It will have to air up a small tank.. Need to operate a hoen or two and pump bike tires as gift.. It would make me happy if you find one for me..

I'll see what I can do.

Tanks, I'm cleaning out stuff.. I might fix up a colection of nut and bolts and spring and things for your repair camp 2011

Ha ha ha Unjon. That would be fantastic. I get as many fixes out of the dwindling supply of that stuff that I have as I do my welder. It is gold for me on playa. Planning on doing some hunting tomorrow.

by **motskyroonmatick** » Fri Oct 15, 2010 11:42 am

Unjon,

I found a compressor for you. Not too small. Not to big. Single V pulley that is about a foot across. The compressor it's self is about 10 inches tall. 4 mounting bolt spots in the bottom. It makes that sucking and chug sound when I turn the pulley so I am fairly confident it works.

It does not have filter side or pressure side manifolds so I will have to make them which is really no big deal. I will make them with NPT threads so you can attach whatever you would like to to them. I don't have any gasket material but I am sure you know an old gasket trick or two. ...I am however a serious procrastinator so I hope to have the thing ready for you some time soon. I'll bring it down to Salem when I visit my sister and it is done. I'll be in touch at the appropriate time to get your address and set up a time.

Motz

by **unjonharley** » Wed Apr 06, 2011 7:42 pm

Bump this for myself..

Have to get to work on projects.. Still 15 degrees colder than normal around here.. Cats want to go back to the house as soon as we get in the shop.. Today he went out to roll on the sidewalk.. Two rolls and back in the warm house..

by **unjonharley** » Wed Jun 15, 2011 9:02 pm

?

Need a little help here.. :idea:

So if I have a mock up of a 1919/1920's delivery truck.

The theam is rite of passage..

With toung in cheek, What would this truck be delivering on the playa?

A punch line :idea:

Date could even be old england, hanson cabs, jack the ripper but before the roaring 20's..

Something twisted but not so much as a frat boy would miss the pun..

Dark to black humer, morbid.. :twisted:

Name the MV :?:

by **Ugly Dougly** » Wed Jun 15, 2011 9:51 pm

Change for sale?
Death's Black Popsicles?
Transformation something?
Metamorphosis?
That's all I got, baby.

by **capjbadger** » Wed Jun 15, 2011 10:27 pm

"Pre-Therapy To-Go
Your one stop phobia shop"

Have it full of stuff like Spiders, Clowns, Clown spiders, Snakes, Aliens, Videos of people falling off buildings, Etc... All playing on video monitors and such.

http://psychology.about.com/od/phobias/ ... hobias.htm

-Badger

by **ygmir** » Thu Jun 16, 2011 6:25 am

maybe have a PA system playing a loop of a dentists drill sound?

by **unjonharley** » Thu Jun 16, 2011 6:53 am

ygmir wrote:maybe have a PA system playing a loop of a dentists drill sound?

Maybe a old time medicine show :?:

Dr unjon's Majic Elixir

This mock up is mounted on a trike back with open cab.. A roof over the driver.. ModelT styyle.. This will give a space for about 24x36 billboard..

by **Ugly Dougly** » Thu Jun 16, 2011 9:53 am

Which rite of passage you like the best, Unjon?

by **unjonharley** » Thu Jun 16, 2011 10:23 am

Ugly Dougly wrote:Which rite of passage you like the best, Unjon?

Wemen, Drugs and Song

ePlaya

DAMN CONTRAPTION

Who is online